Configurer VeriLynx - Longueur

Rédigé le 30/11/2021
Bruno CORDIER

Introduction |

La caméra Verilynx permet d'assister les juges pour les épreuves de sauts.

Pour toute demande d'information - contacter notre service commercial : finishlynx@matsport.com

"Under World Athletics Technical Rule 30.1.1, horizontal jump take-off failures are re-defined to include any breaking of the vertical plane of the take-off line. Rule 29.5 strongly encourages judges to use video or other technology to assist the decision process. VeriLynx cameras, along with special configuration of the FinishLynx software, can be used for this purpose."


Partie 1 | Matériel


  • Placer la caméra dans le plan de la planche d'appel
  • Vous pouvez positionner une seconde caméra face aux athlètes pour confirmation
  • Connecter l'alimentation POE à un onduleur
  • Connecter le cable réseau court de l'ordinateur à l'entrée IN  de l'alimentation POE
  • Connecter le long cable réseau de la caméra à l'entrée OUT  du POE

 



Partie 2 | Logiciel


  1. Démarrer Finishlynx (Version 12 Minimum)
  2. Aller dans Fichier | Options
  3. Sélectionner Verilynx  dans le liste Profile
  4. Redémarrer Finishlynx


Partie 3 | Paramètres Caméra

  1. Cliquer sur l'icone Paramètres caméra 
  2. Ajuster les paramètres :
    • Frame Rate : Maximum
    • Frame Height : 1280 X 720(ou plus)
    • Shutter Speed : 1/700 (ou moins)
  3. Paramètres de Capture:
    • Capture Automatique (identilynx motion)
    • Capture méthode : Trailer = 5